User Guidewww.focusrite.comFA0773-01
10OTHER REDNET SYSTEM COMPONENTSThe RedNet hardware range includes several types of I/O interface, providing various combinations of physical, analogu
11The following diagrams show a single RedNet 5 connected to a single Pro Tools card; an HDX system requires the DigiLink-to-Mini DigiLink adaptor:Red
12If multiple RedNet 5s are in use, each is linked to a separate port on the Pro Tools cards. HDX System shown for simplicity:PRIMARYPRIMARYMac/PCRedN
13Pro Tools SetupOn the Pro Tools Hardware Setup page (click Setup > Hardware), select each RedNet 5 unit in turn and click the Set to Default butt
14Setting the clock sourceIMPORTANT - The diagrams in the preceding section only illustrate the DigiLink interconnections between system elements. How
15Situation 2 – Single Pro Tools system with both RedNet 5s and other Pro Tools interfacesRedNet 5GigabitSwitchRedNet 5Set the same RedNet 5 as Networ
16If a Pro Tools|HD I/O audio interface is to be the clock source: 1. Connect a BNC cable between the LOOP SYNC OUT of one of the Pro Tools interface
17REDNET CONTROLHosting RedNet ControlRedNet Control may be installed on the same computer as that hosting Pro Tools, or on a different one. This choi
18RedNet 5 Control PanelFull details can be found in the RedNet System User Guide. The notes below describe only those aspects of RedNet Control which
19• Base sample rate – not all digital audio equipment is able to clock to higher sample rates, so selecting this option will output word clock at 48
2IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use
20APPENDIXConnector pinoutsPro Tools interfacesConnector type: 2 x DigiLink femaleApplies to: PRIMARY, EXPANSIONEthernet connectorConnector type:
21Performance SpecificationsDigital PerformanceSupported sample rates 44.1 / 48 / 88.2 / 96 / 192 kHzInternal clock sources Local, Word clock input, Lo
22Focusrite RedNet Warranty and ServiceAll Focusrite products are built to the highest standards and should provide reliable performance for many year
23Customer Support and Unit ServicingYou can contact Focusrite Customer Support at:Email: [email protected] (UK): +44 (0)1494 462246Pho
3ENVIRONMENTAL DECLARATIONFor USATo the User:1. Do not modify this unit! This product, when installed as indicated in the instructions
4IMPORTANT SAFETY INSTRUCTIONS ... 2ENVIRONMENTAL DECLARATION ...
5INTRODUCTIONThank you for purchasing this Focusrite RedNet 5.RedNet 5 is a multichannel, bi-directional digital audio interface, which allows an Avid
6About this User GuideThis User Guide applies only to the RedNet 5 Pro Tools|HD/HDX interface. It provides information about installing a RedNet 5 and
7INSTALLATION GUIDEUnit connections and featuresRedNet 5 - Front Panel13458621. AC Power switch2. INPUTS – inputs to the network (i.e., outpu
8RedNet 5 - Rear Panel9 811 10 1213148. PRIMARY – DigiLink connector; use a standard Pro Tools I/O cable to link this to a port on the Pro Tools|HD/H
9Physical CharacteristicsRedNet 5’s dimensions are shown in the diagram below:RedNet 5 requires 2U of vertical rackspace and at least 350 mm of rack d
Comments to this Manuals