Avid Technology AirSpeed 5000 Setup Guide download pdf (Page 61)

Cabling Up the AirSpeed 5000 Server

The following illustration shows the location of the Auxiliary Monitor Output connectors on the

rear of the AirSpeed 5000 chassis.

To connect Auxiliary (1.0/2.3) to BNC cables:

1. Connect one end of the Auxiliary (1.0/2.3) to BNC adapter to one of the Monitor Outputs

(labelled Monitor OUT 1-4 in the diagram) on the rear of the AirSpeed 5000 server.

AirSpeed 5000 2-channel model servers only contain one Video I/O card. Therefore, the Monitor

OUT 3 and Monitor OUT 4 connections are not available.

2. Connect the other end of the Auxiliary (1.0/2.3) to BNC adapter cables to an auxiliary

output device, such as an output monitor for the channel that you want to receive the output

signal from the AirSpeed 5000 server.

Monitor OUT 1

Monitor OUT 2

Monitor OUT 4

Monitor OUT 3

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 137 138

No comments

Avid Technology AirSpeed 5000 Setup Guide Page 61