Avid Technology AirSpeed 5000 Specifications download pdf (Page 151)

Identifying and Replacing Failed Fans

138

5. To remove Fan 5A, do the following:

a. Remove the back cover by removing the top two (2) thumbscrews on the rear of the

server chassis. Then, you can have access to Fan 5A, as shown in the following

illustration:

b. Using a #2 Phillips screwdriver long enough to reach into the chassis, remove the three

(3) screws that hold down the Fan shroud.

c. Remove the two (2) screws that hold down the fan.

d. Pull the fan out of the chassis, and remove the Power harness attached to the fan.

e. Remove the fan from the chassis.

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 206 207

No comments

Avid Technology AirSpeed 5000 Specifications Page 151