Avid Technology Stage 48 Specifications download pdf (Page 16)

Chapter 4: Configuring and Installing I/O in Stage 48 11

Chapter 4: Configuring and Installing I/O in Stage 48

This section shows how to configure remote I/O, and how to

install compatible VENUE Stage I/O cards in Stage 48. The fol-

lowing Stage I/O cards are compatible with Stage 48.

• AI16 Analog Input card

• AO16 Analog Output card

• XO16 Analog/Digital Output card

• AT16 A-Net Output card

Configuring Remote I/O

How you configure the I/O in a Stage 48 depends on the con-

figuration of your current system.

Adding a Second Stage 48 to an

SC48 Remote System

You can expand the Stage I/O capacity of your SC48 Remote

system by adding a second Stage 48 and installing compatible

Stage I/O cards in it. SC48 Remote systems support up to the

maximum Stage I/O capacity of SC48–48 input channels and

32 output channels of combined local and remote Stage I/O.

Converting a Standard SC48 to an

SC48 Remote

If you have a standard SC48 console, it can be converted to an

SC48 Remote system. Converting your SC48 lets you connect

your SC48 to up to two Stage 48 units. In order to convert your

SC48, the top two AI16 input cards must be removed from

your console. These cards can then be installed in Stage 48.

You can choose to also relocate any other compatible Stage I/O

cards from SC48 to up to two Stage 48 units.

Example Configurations

The example configurations described in this section are

based on an SC48 with the following local Stage I/O:

• Three AI16 Input cards (installed in SC48 slots A, B,

and C)

• Two AO16 output cards (installed in SC48 slots D and E)

This SC48 could be reconfigured as an SC48 Remote system in

the following ways:

• Relocate all SC48 Stage I/O to two Stage 48 units. Install

all three input cards in one Stage 48 and both output

cards in a second Stage 48. Remaining SC48 local I/O con-

sists of FOH inputs and outputs.

• Relocate the first two AI16 input cards (corresponding to

Stage input channels 1–32) and the AO16 output card lo-

cated in Slot E (corresponding to Stage output channels

17–32) to a single Stage 48. Because of installation re-

quirements, the remaining local AI16 input card is lo-

cated in slot C of SC48, corresponding to Stage input

channels 33–48. The remaining local AO16 output card is

located in slot D of SC48, corresponding to Stage output

channels 1–16.

• Relocate all three AI16 input cards to a single Stage 48,

and leave both output cards in SC48. All Stage inputs for

the system are located remotely in a single Stage 48, and

all Stage outputs are located locally in SC48.

The VENUE IO16 Option card cannot be installed Stage 48.

Converting an SC48 to an SC48 Remote system can only be

done by Avid-authorized service personnel. However, own-

ers are authorized to remove Stage I/O cards from SC48 and

install them into Stage 48.

These are only example configurations. Other configura-

tions are possible. The only requirement is that the top two

AI16 output cards must be removed when converting an

SC48 to an SC48 Remote system.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 28 29

Comments to this Manuals

No comments

Avid Technology Stage 48 Specifications Page 16

Comments to this Manuals

Related products and manuals for Dimmers Avid Technology Stage 48