Avid Technology Stage 48 Specifications download pdf (Page 26)

Chapter 5: Specifications 21

Power and Status LED Indicators

Status LED Indicator

(Stage 48 and Ethernet Snake Card)

The Status LEDs on the Ethernet Snake Card and the Stage 48

light to indicate status as follows:

Power LED Indicator

(Stage 48 Only)

The Power LED lights to indicated the power status of Stage 48

as follows:

Status LED

Status LED Indicates

Green solid Initialization is complete and the device is

ready to pass audio.

Yellow solid The device is initializing. No audio passes

during initialization.

Red solid The device has failed to initialize. Power

down the device, then restart.

Green flashing A firmware update for the device is in prog-

ress. No audio passes during a firmware

update.

Red flashing A firmware update has failed. Check con-

nections to the computer and retry the

update.

Yellow flashing A Stage 48 or Ethernet Snake card circuit

board temperature alert. Power down the

device and check that the back of the device

is properly ventilated

Power LED

Status LED Indicates

Green solid A green solid Power LED indicates that

Stage 48 is powered on and ready for use.

Red flashing A red flashing Power LED indicates a

Stage 48 voltage problem alert. Power down

Stage 48 and verify the power source.

Yellow solid A solid yellow Power LED indicates a

Stage 48 fan failure. Power down the unit,

disconnect power, remove the back panel,

and make sure the fan cable is properly con-

nected (see “Installing I/O Cards in Stage

48” on page 15 for instructions).

Yellow flashing A yellow flashing Power LED indicates a

Stage 48 power supply temperature alert.

This may indicate that the device is over-

heating. Power down Stage 48 and check

that the unit is properly ventilated.

1 2 ... 21 22 23 24 25 26 27 28 29

Comments to this Manuals

No comments

Avid Technology Stage 48 Specifications Page 26

Comments to this Manuals

Related products and manuals for Dimmers Avid Technology Stage 48